AD9652: 16-BIT, 310 MSPS, 3.3/1.8 V DUAL ANALOG-TO-DIGITAL CONVERTER (ADC)

ADUCM350: 16-BIT PRECISION, LOW POWER METER ON A CHIP WITH CORTEX-M3 AND CONNECTIVITY
22. Januar 2015
Microchip Expands Portfolio of Digitally Enhanced Power Analog Controllers With Integrated MCU
22. Januar 2015

AD9652: 16-BIT, 310 MSPS, 3.3/1.8 V DUAL ANALOG-TO-DIGITAL CONVERTER (ADC)

The AD9652 is a dual, 16-bit analog-to-digital converter (ADC) with sampling speeds of up to 310 MSPS. It is designed to support demanding, high speed signal processing applications that require exceptional dynamic range over a wide input frequency range (up to 465 MHz). Its exceptional low noise floor of −157.6 dBFS and large signal spurious-free dynamic range (SFDR) performance (exceeding 85 dBFS, typical) allows low level signals to be resolved in the presence of large signals.

The dual ADC cores feature a multistage, pipelined architecture with integrated output error correction logic. A high performance on-chip buffer and internal voltage reference simplify the inter-face to external driving circuitry while preserving the exceptional performance of the ADC.

The AD9652 can support input clock frequencies of up to 1.24 GHz with a 1, 2, 4, and 8 integer clock divider used to generate the ADC sample clock. A duty cycle stabilizer is provided to compensate for variations in the ADC clock duty cycle. The 16-bit output data (with an overrange bit) from each ADC is interleaved onto a single LVDS output port along with a double data rate (DDR) clock. Programming for setup and control are accomplished using a 3-wire SPI-compatible serial interface.

The AD9652 is available in a 144-ball CSP_BGA and is specified over the industrial temperature range of −40°C to +85°C. This product is protected by pending U.S. patents.

PRODUCT HIGHLIGHTS

    • Integrated dual, 16-bit, 310 MSPS ADCs.
    • On-chip buffer simplifies ADC driver interface.
    • Operation from a 3.3 V and 1.8 V supply and a separate digital
      output driver supply accommodating LVDS outputs.
    • Proprietary differential input maintains excellent SNR
      performance for input frequencies of up to 485 MHz.
    • SYNC input allows synchronization of multiple devices.
    • Three-wire, 3.3 V or 1.8 V SPI port for register programming
      and readback.

APPLICATIONS

    • Miltary radar and communications
    • Multimode digital receivers (3G or 4G)
    • Test and Instrumentation
    • Smart antenna Systems

Product Page

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.