AD8210: High Voltage, Bidirectional Current Shunt Monitor

ADUM4150: 5kV, Dedicated Isolators for High-Speed SPI Interfaces (with 1/1 Aux channel directionality)
26. Januar 2015
Microchip Introduces New Low Cost PIC32MX1/2/5 32-bit MCU Series With Feature-Rich Peripheral Mix and Large, Scalable Memory Options
27. Januar 2015

AD8210: High Voltage, Bidirectional Current Shunt Monitor

The AD8210 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from −2 V to +65 V. The typical supply voltage is 5 V.
The AD8210 is offered in a SOIC package. The operating temperature range is −40°C to +125°C.

Excellent ac and dc performance over temperature keep errors in the measurement loop to a minimum. Offset drift and gain drift are guaranteed to a maximum of 8 μV/°C and 20 ppm/°C, respectively.

The output offset can be adjusted from 0.05 V to 4.9 V with a 5 V supply by using the VREF1 pin and the VREF2 pin. With the VREF1 pin attached to the V+ pin and the VREF2 pin attached to the GND pin, the output is set at half scale. Attaching both VREF1 and VREF2 to GND causes the output to be unipolar, starting near ground. Attaching both VREF1 and VREF2 to V+ causes the output to be unipolar, starting near V+. Other offsets can be obtained by applying an external voltage to VREF1 and VREF2.

APPLICATIONS

    • Current sensing
    • Motor controls
    • Transmission controls
    • Diesel injection controls
    • Engine management
    • Engine management
    • Suspension controls
    • Vehicle dynamic controls
    • DC-to-dc converters

Jetzt Kontakt anfordern

Anfrage zum AD8210 starten

Analog Devices Product Page

 

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.